Fence Gates: Where to Put Them for Dogs, Mowers and Access
Fence Gates

Fence Gates: Where to Put Them for Dogs, Mowers and Access

•Published: 05 NOV, 2026

Backyard Fence Layout: Where Should Fence Gates Go for Dogs, Mowers, and Access?

Fence gates should go where you and your equipment already travel: one walk gate on the path you use every day, usually from the driveway or side yard, and a wider gate wherever a mower, trailer or truck needs to get into the backyard. Keep gates away from low, muddy spots and steep slopes, make sure dogs cannot slip through, and leave access to meters and utilities. Planning gate placement before the fence goes up is far easier than adding a gate later.
This guide covers how to choose gate locations, how wide to make them, how to keep dogs and children safe, and which details matter for a gate that works for years.

Where should the main gate go in a backyard fence?

The main gate should sit on your most natural path between the front of the house and the backyard. For most homes that is the side yard closest to the driveway or the door you use most.
  • Walk the route you take with groceries, trash cans and yard tools
  • Place the gate close to that route, not at a distant corner
  • Make sure the ground on both sides is level enough for the gate to swing
  • Keep it visible from the house if you want to see who comes and goes
A gate in the wrong place gets propped open or ignored, and an open gate defeats the purpose of the fence.

How wide should gates be for mowers and equipment?

Make gates wide enough for the largest thing that will pass through, plus some room on each side. Typical sizes are about 4 feet for a walk gate and 10 feet or more for a double drive gate.
  • Measure your mower deck, wheelbarrow and any trailer or utility vehicle
  • Add a margin so you are not scraping posts every time
  • Plan a double gate if a truck, boat or delivery of mulch or stone will ever need to get into the backyard
  • Think about future projects, such as a deck, a pool or a shed, which need equipment access
A double gate can be opened halfway for everyday use and fully for big jobs.

How do you keep dogs and children safe at the gate?

The gate is the weakest point in most backyard fences, and it is often where dogs escape. Our post on why dogs escape the yard covers the gaps to check.
  • Keep the gap under the gate small, and avoid placing gates where the ground dips
  • Use self-closing hinges so the gate does not stay open after someone walks through
  • Choose a latch that closes on its own and, for small children, sits high or works from the inside only
  • Make sure the gap between the gate and the post is too narrow for a small dog to squeeze through
  • Add a lock if you want to keep the gate closed to visitors
Gates in a fence around a pool are usually subject to specific rules for self-closing and latching hardware, so confirm the local requirements before building.

What about utilities, meters and service access?

Plan access for anyone who needs to reach the backyard: meter readers, HVAC technicians, lawn crews and utility workers. Note where the electric, gas and water meters and the air conditioning unit sit, and keep a gate near them or leave them outside the fence. It also helps to have a gate where trash and recycling bins are stored, so they can be rolled out without crossing the house.

Which way should a gate swing?

Most backyard gates swing into the yard, so they do not open into a driveway, sidewalk or neighbor's property. The ground in the swing path should be flat and clear, or the gate will drag. On a slope, a gate that swings downhill can catch on the ground, so the swing direction and the gate height are planned together.
For driveway entrances where swinging is difficult, a sliding or automatic gate can work. Quality #1 Fence and Deck Company says it installs everything from automatic metal gates to custom wood gates that match the rest of the fence.

Should the gate match the fence?

Usually, yes. A gate built in the same material and style as the fence looks like part of the design. Wood gates need a solid frame and diagonal bracing to stay square, while metal and aluminum gates resist sagging. If you are still choosing materials, our comparison of wood vs vinyl privacy fencing helps.
The Nashville gate installation page of Quality #1 Fence and Deck Company describes gates built to swing smoothly and lock tightly, including aluminum entries and wood gates with latches.

Frequently asked questions about fence gates

How many gates does a backyard fence need?

Many yards need two: a walk gate for daily use and a wider gate for equipment. Large lots, corner lots or yards used by service crews may need a third. Fewer gates mean fewer weak points for pets.

How wide should a gate be for a riding mower?

Measure the mower's deck and add a comfortable margin on each side. Many homeowners with riding mowers choose a double gate or a single gate of about 5 to 6 feet. A double gate gives the most flexibility.

Can a gate be added to an existing fence?

Usually, yes. The fence is cut, new posts are set to carry the gate's weight and the gate is hung. Posts that hold a gate need to be stronger and set deeper than regular line posts.

Why does my gate sag over time?

Sagging usually comes from a leaning post, loose hinges or a wood frame without proper bracing. Strong gate posts and good hardware prevent most sagging from the start.

Plan your gates with Quality #1 Fence and Deck Company

Quality #1 Fence and Deck Company is based in Madison, TN and builds wood, vinyl, aluminum, chain-link and custom fences, along with gates, decks and porches. It works in Madison and Nashville, and its site also names Lebanon, Murfreesboro, Smyrna and Brentwood. To plan a backyard fence with gates in the right places, call 615-606-4785 or request a free estimate.